← How-To Guides

How to identify an old cabinet hinge

Find the markings that matter, measure the two hole patterns, and gather enough information to identify a replacement.

  1. Photograph the hardware with the door open

    Take a clear picture of the whole hinge, the plate attached to the cabinet, and the area where the door meets the cabinet frame. A wide shot helps show whether the door overlays the frame or sits inside the opening.

  2. Read the hinge and the plate

    Check the hinge arm, the back of the cup and the separate plate for logos and stamped numbers. Some stamps only become visible with the hardware removed. Support the door and have someone hold it if a hinge has to come off.

  3. Measure before ordering

    Write down the closed-door overlay, cup diameter and depth, door-side fastener spacing, and cabinet-side spacing. Include the door thickness for a corner hinge. Retain the punctuation and all digits in the stamped number.

  4. Use the available fit evidence

    Search the full number first. If the result covers a hardware family, compare the measurements and mounting plate with the linked manufacturer drawing. A hinge-matching service can use your photos when the markings are worn or ambiguous.

Source documents